JeffTron CNC Bolt Catch M4 - A
CNC bolt catch for airsoft electric weapon type M4 / M16 made on a CNC machining center from the material EN AW 7075 + micro switch. Designed for the M4 body from G&P and the like Bolt catch switch is designed to work with Leviathan devices with input port: Leviathan-V2 optical to stock Leviathan-V2 optical to front It adds new function virtual reload, which is used to reset the magazine capacity to the set amount. Specifications: Bolt catch switch is pressure-activated tactile switch Designed to glue on the Bolt catch in the M4 style airsoft gun Solder 2 black wires to the leviathan board INPUT port Bolt catch switch solder on SIG and GND pad in the Leviathan device (doesn't matter which wire goes to which position) In the „Leviathan by jefftron" app use interface „External input" to activate desired function "virtual reload"
JeffTron Hair Trigger Adapter
3D printed hair trigger adapter to CNC trigger for M4/M16 (MP5/G3) series. Thanks to this adapter shot can be made by very short trigger pull from 0,15 mm. Designed only for the Leviathan-V2 optical trigger: Leviathan-V2 optical to stock Leviathan-V2 optical to front Leviathan - V2 optical to stock (Gelblaster version) SPECIFICATIONS: Adapter is 3D printed part (SLA printer) Only for installation to Jefftron CNC trigger for M4/M16 (MP5/G3) series. It is not necessary to use the adjustment screw on the trigger , it is only used to fine tune the hair trigger. Secure adapter and the screw position by super glue PACKAGE CONTENTS: 3D printed hair trigger adapter QR code for online manual
JeffTron AR Mosfet
Complete wiring is designed for airsoft replica AR15 with battery in the stock. Everything is ready, just solder the loose wires to the original trigger contacts in the gun. The Micro mosfet III is integrated into the DeanT connector so it takes up minimal space. MOSFET BENEFITS: Increases gun rate of fire and battery holds longer, than with basic wiring. Designed for spring up to M170 (equivalent for current 90A single shot fire or 35A burst fire for max. 30s). Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V) No current consumption in the idle mode No sparking on switch contacts Board covered by conformal coating, it protect it against water SPECIFICATIONS: AR mosfet is suitable for installation with original V2 contacts in AR15, M4, SR25, MP5 or G3 airsoft gun The complete wiring allows quick and easy installation into the weapon, it is designed for all types of AR weapons with the battery located in the stock There are high quality powerwires 1,5 qmm (AWG16) with with thin and hard MPPE insulation and signal blue wire 0.34 qmm (AWG22) with MPPE insulation In auto fire mode piston stops in random position due the gearbox design For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox PACKING: Micro mosfet III soldered on T-Plug connector with complete wiring for battery in stock for AR15, M4, SR25, MP5 or G3 airsoft gun Installation manual in English
JeffTron Active Brake - V2
Professionally made active brake designed for airsoft electric guns (AEG). Device increases gun rate of fire and battery holds longer, than with basic wiring. In semi fire mode piston isn't partially stretched, spring is fully released, parts in mechabox aren't under strain and nozzle locks hop-up chamber in greater part (depends on ROF). Active break solves multiple shots in semi mode with weapons with very high rate of fire (ROF). It is fully integrated inside the gearbox version 2 instead of the original trigger contacts, compatible with Tokyo Marui standard. SPECIFICATIONS: Active brake build on trigger contacts from SHS company Easy installation inside the gearbox version 2 Devices without wires, you can use max. 1,5qmm (AWG16) power wires and 0,5qmm (AWG20) signal wires Suitable for service center, if you are not familiar with soldering to the circuit board, choose device with wiring and accessories. Designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s). For higher load please use Active brake II (it is outside gearbox) Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V) No current consumption in the idle mode No sparking on switch contacts Active braking uses the excess energy from the motor to stop it. The braking effect is the most powerful with high torgue motor In auto fire mode piston stops in random position due the mechabox design For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox
JeffTron Leviathan V2 Optical to Stock - Edge CNC Trigger (Avtryckare: Svart)
The Leviathan - V2 optical is one of the most advanced ETU (electronic trigger unit) on the market. It combines optical and switch sensors for better handling and durability. Built-in wireless communication for quick setup using iOS or Android smartphones! Tactile trigger switch has travel only 0,13mm long for ultimate hair trigger feeling. You can choose from 10 types CNC triggers with screw to adjust trigger travel. Unique Real feel trigger system (RFTS) with integrated spring simulates trigger resistance like in the real gun. It adds secondary resistance with release after the fire. RFTS was designed by professional gunsmith for more realistic feel from shooting External output and input port serves for custom accessories Real time response for change settings -> immediately test result Easy installation into the gearbox (fully integrated inside the gearbox instead of the original trigger contacts) New functions are for free for every user via online update The Leviathan - V2 optical brings endless possibilities for your gun!
JeffTron Two-Stage Trigger - V3
This adapter imitates the behavior of the two-stage trigger in a real gun it allows the user to know exactly when the firing will take place. This gives better accuracy and realistic shooting feel. The two-stage trigger has an operating process that involves two distinct phases of firing: In the first stage there is smooth trigger pull until it hit the wall In the second stage the weight of the trigger increases to break through the wall “click” past the second stage initiates the shot This system was designed by professional gunsmith Tomas Linhart, according to the trigger behavior of a real gun like the rest of the RFTS family, but this system is more sophisticated and more elaborate compared to the standard RFTS V3 spring, which is not suitable for Retroarms gearbox without modifications. BENEFITS: For those who want a more realistic airsoft gun shooting behavior Ability to “prep” the first stage - press through the first stage to take up the slack, and from there they can add a bit more pressure to actually fire a round In high stress, high adrenaline situations allows for a greater level of control, where accidental discharges and hitting the wrong target is most destructive If you don't want to lose the feeling in your shooting finger For snipers who want accurate shooting Protects this part of the gearbox against dirt ingress PACKAGING: 3D printed two-stage adapter (for Retroarms mechabox V3 with Leviathan - V3 Optical installed) V3 trigger return spring Holding screw for the gearbox Installation manual via QR code
JeffTron Active Brake - V2 med Kablage
Professionally made mosfet with motor active braking designed for airsoft electric guns (AEG). In semi fire mode piston isn't partially stretched, spring is fully released, parts in mechabox aren't under strain and nozzle locks hop-up chamber in greater part (depends on ROF). Active break solves multiple shots in semi mode with weapons with very high rate of fire (ROF). Device increases gun rate of fire and battery holds longer, than with basic wiring. - Very small device dimension, it fits nearly everywhere - Presoldered wires allows faster and easier installation into the gun, it is long enough for all kind of weapons. Simply cut wires to the required length and attach connectors (included in package) There are high quality power wires 1,5 qmm (AWG16) with thin and hard MPPE insulation and signal blue wire 0.34 qmm (AWG22) with MPPE insulation Board covered by conformal coating, it protect device against water If you want to use your own wires, choose variant without wiring Designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s) Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V) Active braking uses the excess energy from the motor to stop it. The braking effect is the most powerful with high torgue motor 6 wires connection Device size 27x10x7mm No current consumption in the idle mode No sparking on switch contacts In auto fire mode piston stops in random position due the mechabox design For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox
JeffTron Flatsäkring (Ampere: 25A)
Flatsäkring för airsoftvapen (AEG).
JeffTron Leviathan V2 Optical to Stock - Edge CNC Trigger (Avtryckare: Röd)
The Leviathan - V2 optical is one of the most advanced ETU (electronic trigger unit) on the market. It combines optical and switch sensors for better handling and durability. Built-in wireless communication for quick setup using iOS or Android smartphones! Tactile trigger switch has travel only 0,13mm long for ultimate hair trigger feeling. You can choose from 10 types CNC triggers with screw to adjust trigger travel. Unique Real feel trigger system (RFTS) with integrated spring simulates trigger resistance like in the real gun. It adds secondary resistance with release after the fire. RFTS was designed by professional gunsmith for more realistic feel from shooting External output and input port serves for custom accessories Real time response for change settings -> immediately test result Easy installation into the gearbox (fully integrated inside the gearbox instead of the original trigger contacts) New functions are for free for every user via online update The Leviathan - V2 optical brings endless possibilities for your gun!
JeffTron Leviathan V2 Optical to Stock - Curved CNC Trigger (Avtryckare: Svart)
The Leviathan - V2 optical is one of the most advanced ETU (electronic trigger unit) on the market. It combines optical and switch sensors for better handling and durability. Built-in wireless communication for quick setup using iOS or Android smartphones! Tactile trigger switch has travel only 0,13mm long for ultimate hair trigger feeling. You can choose from 10 types CNC triggers with screw to adjust trigger travel. Unique Real feel trigger system (RFTS) with integrated spring simulates trigger resistance like in the real gun. It adds secondary resistance with release after the fire. RFTS was designed by professional gunsmith for more realistic feel from shooting External output and input port serves for custom accessories Real time response for change settings -> immediately test result Easy installation into the gearbox (fully integrated inside the gearbox instead of the original trigger contacts) New functions are for free for every user via online update The Leviathan - V2 optical brings endless possibilities for your gun!
JeffTron Leviathan V2 Optical to Stock - Curved CNC Trigger (Avtryckare: Röd)
The Leviathan - V2 optical is one of the most advanced ETU (electronic trigger unit) on the market. It combines optical and switch sensors for better handling and durability. Built-in wireless communication for quick setup using iOS or Android smartphones! Tactile trigger switch has travel only 0,13mm long for ultimate hair trigger feeling. You can choose from 10 types CNC triggers with screw to adjust trigger travel. Unique Real feel trigger system (RFTS) with integrated spring simulates trigger resistance like in the real gun. It adds secondary resistance with release after the fire. RFTS was designed by professional gunsmith for more realistic feel from shooting External output and input port serves for custom accessories Real time response for change settings -> immediately test result Easy installation into the gearbox (fully integrated inside the gearbox instead of the original trigger contacts) New functions are for free for every user via online update The Leviathan - V2 optical brings endless possibilities for your gun!
JeffTron Flatsäkring (Ampere: 30A)
Flatsäkring för airsoftvapen (AEG).
JeffTron Micro Mosfet III
Professionally made mosfet designed for airsoft electric guns (AEG). Device increases gun rate of fire and battery holds longer, than with basic wiring. IMPROVEMENTS OVER MICRO MOSFET II: Designed for higher current loads Can be soldered directly to the minus contact of the T-Plug connector SPECIFICATIONS: Very small device dimension, it fits nearly everywhere Devices without wires, you can use max. 1,5qmm (AWG16) power wires and 0,5qmm (AWG20) signal wires Suitable for service center, if you are not familiar with soldering to the circuit board, choose device with wiring and accessories Designed for spring up to M170 (equivalent for current 90A single shot fire or 35A burst fire for max. 30s) Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V) 5 wires connection Positive wire isn't connect into device device size 16x6,4x3,5mm No current consumption in the idle mode No sparking on switch contacts In auto fire mode piston stops in random position due the mechabox design For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox